How much does electrical panel upgrade cost in Phoenix?
In Phoenix, AZ, an electrical panel upgrade typically costs $2,050–$4,100 to upgrade to 200-amp service. Upgrading an electrical panel boosts your home's capacity for modern loads like EV chargers, heat pumps, and additions. Cost depends on the new amperage and whether the service entrance also needs work.
Get free electrical panel upgrade quotes from vetted Phoenix pros
Compare a few local quotes before you commit — prices for the same job vary widely between contractors.
Compare local quotes →Cost by scope in Phoenix
These ranges are adjusted for Phoenix labor and permit costs:
| Type | Phoenix price range |
|---|---|
| Panel replacement (same amperage) | $1,350–$2,550 |
| Upgrade to 200-amp service | $2,050–$4,100 |
| Upgrade + new service mast/meter | $3,050–$6,100 |
Estimates for 2026; actual quotes vary by home, scope, and contractor. Always get written bids.
What drives electrical panel upgrade cost
- Target amperage: Going from 100 to 200 amps (or higher) means a bigger panel and often a new service entrance.
- Panel location & access: A cramped or far-from-the-meter location makes the job slower and pricier.
- Service entrance: Upgrading the mast, meter, and utility connection adds cost beyond the panel itself.
- Code corrections: Older homes often need grounding, bonding, or circuit fixes to pass inspection.
- Permits & labor: An electrical permit, utility coordination, and licensed-electrician rates drive much of the total.
Phoenix cost factors
Phoenix's extreme desert heat makes air conditioning the most critical system in the home, often requiring larger tonnage and tile or foam roofing built for sun. Arizona permitting is generally lighter and faster than California's, keeping labor competitive.
Frequently asked questions
How much does an electrical panel upgrade cost in Phoenix?
Upgrading to a 200-amp panel in Phoenix typically costs $2,050–$4,100. A simple same-amperage replacement is lower; adding a new service mast and meter runs higher.
What are the signs I need a panel upgrade?
Frequently tripped breakers, a fuse box, flickering lights, a panel under 100 amps, or plans for an EV charger, heat pump, or addition all point to an upgrade.
How long does a panel upgrade take?
Most panel upgrades are a 4–8 hour job, plus a short utility disconnect and an inspection. Service-entrance work can extend it.
Do I need a permit to replace an electrical panel?
Yes — panel work requires an electrical permit and inspection almost everywhere, and should only be done by a licensed electrician.
Get matched with vetted Phoenix electrical panel upgrade pros and compare free quotes.
Compare local quotes →Electrical Panel Upgrade costs in other cities
Sacramento, San Jose, Fresno, San Diego, Los Angeles, Austin, Dallas, Houston, Denver, Atlanta, Chicago, Miami
Other project costs in Phoenix
- Roof Replacement in Phoenix
- Hvac Installation in Phoenix
- Kitchen Remodel in Phoenix
- Water Heater Replacement in Phoenix
- Bathroom Remodel in Phoenix
- Window Replacement in Phoenix
- Interior Painting in Phoenix
- Flooring Installation in Phoenix
- Solar Panel Installation in Phoenix
- Fence Installation in Phoenix
- Garage Door Replacement in Phoenix
Published 2026-06-16. Cost ranges are general 2026 estimates for guidance only, not quotes. Get written bids from licensed local contractors.